-40%
2009 - 2014 Ford F-150 4

2009 - 2014 Ford F-150 4" Lift Spindle Kit DOT Approved Brakelines 2WD

$ 259.91

Availability: 73 in stock
  • Manufacturer Part Number: Ford F-150 2WD Lift Kit,
  • Surface Finish: E-Coat Finish on Non-Machined Surfaces
  • Year (cont): 2015, 2016, 2017
  • Placement on Vehicle: Left,Right,Front
  • Brand: Spindle-Source
  • Adjustable: No
  • Item Listing Group ID: Spindle-Source Listing Group 228
  • Kit or Single Part: Kit
  • Model Year: 09, 10, 11, 12, 13, 14
  • Included Hardware: Extended Brake Lines,Mounting Hardware
  • Kit Parts Included: Lift Spindles,DOT Approved Extended Brake Lines
  • Lift Height: 4" Front
  • Interchange Part Number: Level Kit, F-150 Lift Kit, Lift Spindles F-150
  • Warranty: Lifetime
  • Fitment Type: Performance/Custom
  • Superseded Part Number: 703440
  • Condition: New
  • Year: 2009, 2010, 2011, 2012, 2013, 2014
  • Suspension Category: Aftermarket Suspension Components
  • Other Part Number: F150 Lift Spindles

    Description

    THESE SPINDLES ARE FOR
    2WD ONLY!!
    !
    THEY WILL
    NOT
    FIT 4WD MODELS!
    NO PO BOXES!!  EXCEPT  HI , AK , GU , PR
    Description:
    These spindles allow you to lift the front of your vehicle by 4".  Using the spindles keeps your same suspension geometry as your stock ride!  The best and easiest way to lift your 2WD Truck!
    Included:
    1 Set of 4" Lift Spindles.  These spindles are E-Coated on the non-machined surfaces to give you the best finish and RUST PROTECTION.
    1 Set of DOT Approved Extended Brake Lines
    Vehicles:
    2009 - 2020 Ford F-150
    2WD ONLY!!
    Will Not Fit Raptor or 4wd
    Models
    Fitment Notes:
    Min Of 17 x 8 Rim With 4.25"- 6.25" Backspacing
    Track Width Increases By Approximately 1/2" Per Side.
    Will Clear 33" Tire With Proper Wheel And Tire Offset Selections (Clears Up To
    33" x 12.50)
    Wheels Wider Than 9" With Less Than 4.5" Backspacing Is Not Advised
    Will Fit Factory Rims With 11.5" Max Width Tires Or Else Wheel Spacers Are Needed
    Lip Of lower Control Arm Must Be Ground Down Slightly For Proper
    Clearance
    Of Control Arms. Send Us A Message For Details And Pictures.
    Fits 2WD Vehicles Only
    Will Not Fit Raptor Model
    Does Not Fit Vehicles That Previously Had A Drop Cross Member Lift Kit Installed Unless It Has Been Fully Converted Back To Stock.