-40%

2009-2018 for Dodge Ram 1500 4WD 2" front +1.5" rear Full Lift Kit Leveling Kit

$ 36.95

Availability: 65 in stock
  • Manufacturer Part Number: K8510D-2-1.5
  • Other Part Number: For Dodge Ram 1500 2009 2010
  • Brand: KSP Performance
  • Fitment Type: Direct Replacement
  • Kit Parts Included: Lift Spacer
  • Part Type: Suspension Lift Kit
  • Material: Forged 6061 Aircraft Aluminum
  • Rear Lift Height: 1.5"/ 1.5 inchs /1.5in. Front
  • Included Hardware: Mounting Hardware
  • Surface: Black anodized
  • The thick of Front Lift Kit: About 30mm
  • Warranty: Lifetime
  • Lift Height: 2" Front + 1.5" Rear
  • Note: Lift amount does NOT equal spacer thickness
  • Front Lift Height: 2"/ 2 inchs /2in. Front
  • Interchange Part Number: For Ram 1500 2009 2010 2011 2012 2013 2014, For Ram 1500 2015 2016 2017 2018 2019 2020, Only For coil spring 4WD 4X4, Does not fit 2WD /Mega cab/air suspension
  • Placement on Vehicle: Left, Right, Front, Rear
  • Condition: New
  • UPC: 788601131889
  • Lug Bolt: 10.9-12.9 Grade soild bolts

    Description

    2" Front 1.5" Rear complete lift kit for 09-18 Dodge RAM 1500 4WD
    This lift kit will raise the front of your Dodge RAM by a true 2" in the front and 1.5" in the rear.
    Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.
    Installed in 1-2 hours and no special tools needed(SPRING COMPRSSOR will make installation easier but not must)
    CONTENT
    2x Front Lift Kits
    2x Rear Struct Spacers
    Installation Hardware
    Installation Instructions
    Fits 2009-2020 DODGE RAM 1500 4WD 4X4
    DOES NOT FIT 2WD MEGA CAB MODELS / REBEL MODELS/ WARLOCK MODELS
    NOT COMPATIBLE WITH FACTORY AIR SUSPENSION MODELS
    2009 RAM 1500 4WD 4X4
    2013 RAM 1500 4WD 4X4
    2017 RAM 1500 4WD 4X4
    2010 RAM 1500 4WD 4X4
    2014 RAM 1500 4WD 4X4
    2018 RAM 1500 4WD 4X4
    2011 RAM 1500 4WD 4X4
    2015 RAM 1500 4WD 4X4
    2019 RAM 1500 4WD 4X4
    2012 RAM 1500 4WD 4X4
    2016 RAM 1500 4WD 4X4
    2020 RAM 1500 4WD 4X4
    1
    .
    Raise your ride a true 2'' front and 1.5'' rear.
    2. Forged billet aluminum, front lift spacer Precision CNC machined with T6 treated and anodized black.
    3. Maintain factory ride quality; Increased ground clearance; Levels the front with the rear;
    4. Fit larger rims and tires.
    5.
    Alignment is Always Recommended After Installation .
    .